7
4
Control / Operation
4.1
Connections
4.1.1 Connecting the spray
nozzle to wand
Insert spray nozzle into wand quick connect.
NOTE!
Always remove any dirt from
the nipple before connecting
the
nozzle
to the spray gun.
4.2
Switching on the cleaner
4.2.1
Cold water operation
Before starting up the engine, you must
carefully read through the instructions for use
of the engine. In the instructions for use the
operation and service of the engine is
described.
When the engine has been started, the high
pressure washer can be used for cleaning
with cold water.
4.2.2
Hot water operation
1.
Turn the
burner
switch to the
on position
.
2. Set thermostat to desired
temperature.
3. Unlock the spray handle and
squeeze the trigger.
4.
The oil burner will start.
5.
Release the trigger and lock
the spray handle when not in
use.
4.3
Using cleaning agents
If you want to use detergents, you
will need an external injector.
Please contact your local
distributor for further information.
CAUTION!
Never allow cleaning agent
to dry on the surface to be
cleaned. The surface may be
damaged.
