4K Video Conference CameraUser Manual
12
If you don't know camera IP, view as below:
Method 1: Press * and # and 4 on remote
controller one by one, the camera IP address
will be shown on screen.
Method 2: Connect camera to PC with network
cable, use “upgrade_En.exe” to search for IP
address.
Change IP address, two methods as below:
Method 1: Login the web page, select
“Network > Lan Settings”, change IP address,
subnet mask and gateway. Click “Apply” and
restart the camera.
Method 2: Open “upgrade_En.exe”, change IP
and click “Set”. After modified, the video
conference camerawill be restart.
Change IP address:
Step 1
Search the IP address of camera.
Step 2
Select the camera IP of you want to
change.
Step 3
Select the config dialog of upgrade
applets.
Step 4
Change the IP address, netmask and
gateway, then click “Set”.
Step 5
Finish.
6.4.2 Visit/Access Camera
Input http://192.168.100.88 to IE (betterwith IE
web browser,others will cause little latency),a
login window
pop up,input username:
admin,password: admin, shown as below:
After login, shown as below:
