3
2019 Voxx Electronics Corporation. All rights reserved.
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the button. The
parking lights will flash one (1) time, indicating the system is armed, has locked the
doors (if equipped and connected) and activated the starter disable feature. The LED
status indicator will blink steadily, once per second.
Using Your Remote Control
Disarming the Security System
To disarm the system press the
button. The parking lights will flash three (3) times,
and remain ON for four (4) seconds indicating the system is disarmed and has
unlocked the doors (if equipped and connected).
Note: If the system was triggered while the driver was away from the vehicle it will
beep and flash the parking lights four (4) times.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the
button for 3
seconds will open the vehicle’s trunk or hatch.
Using the Personal Protection Alarm (Panic)
Press and hold the
button for 2 seconds to activate the personal protection alarm.
During panic mode, the normal function of the transmitter buttons will be suspended.
To stop the alarm, press the or button on the transmitter.
Using the Car Finder Feature
When the system is Armed, Press the
button to locate your vehicle. The system will
flash the parking lights and beep ten (10) times. To stop the Car Finder feature, Press
the
one (1) time.
Silent Arming or Disarming the Security System
To Arm or Disarm the system silently, press
then or
buttons. The parking lights
will flash indicating the system has armed / disarmed.
Note: If the system was triggered it will not beep to notify the driver of the alarm
trigger. The system will flash the parking lights only.
Activating the AUX Output (Optional)
If this feature is enabled on your system, pressing the
and buttons simultaneously
will activate an optional feature. This feature can be programmed for a wide range
of functions like power window or sunroof automation, please consult your installing
dealer to determine the functionality of your system.
