10
APS596Z Owners REV.B
5 Button Remote Control - Model 185SP
The CR2032 battery inside each remote control should last approximately one
(1) year under normal use. When the batteries become weak you will notice
the remote control range (the distance from the vehicle the remote control will
work) deteriorate and the small LED on the remote control will dim. To replace
the remote control batteries:
1.
Using a coin, disassemble the halves of the remote control.
2. Remove the old battery, observing the +/- symbols on the batteries
and replace with a new battery.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.
Replacing The Batteries
2 Way LCD Remote Control - Model 18LCDSP
The CR2450 battery inside the 2-way LCD remote control should last
approximately six (6) months under normal use. When the battery becomes
weak you will notice the remote control range (the distance from the vehicle
the remote control will work) deteriorate and the battery icon on the LCD
remote control will show 1 bar or less.
1. Gently slide the battery cover off of the remote control.
2. Remove the old battery, observing the +/- symbols on the battery,
and replace with a new battery.
3. Gently slide the battery cover on to the back of the remote control.
4. Test operation of the remote control.
1.
Cycle the vehicle ignition ON.
2. Press and release the valet button three (3) times.
3. Press button of each transmitter you wish to program, the LED’s will
flash to confirm each transmitter.
4. Turn the vehicle ignition OFF.
NOTE:
This system has one (1) button programming which programs all
channels of the system.
NOTE:
The system will hold up to four (4) transmitters in memory,
programming a 5th transmitter will erase the oldest transmitter in memory.
Programming Your Remote Control
