Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective
gloves during installation.
Moving the cooker
Please note that this appliance may be
heavier than it appears. Take care if
the appliance needs to be lifted during
installation - always use an appropri-
ate method of lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open
the door and grasp the frame of the
cooker, taking care that the door does
not shut on your fingers.
Take care to avoid damage to soft or
uneven floor coverings when moving
the appliance. Some cushioned vinyl
floor coverings may not be designed
to withstand sliding appliances without
marking or damage.
This is a type X appliance regarding
installation requirements.
Important:
Ensure that you route
all mains cables well clear of any
adjacent heat source.
Clearances
This cooker may be fitted flush to
base units. However, for models with
side opening doors, we recommend a
side clearance of 60mm between the
cooker and any side wall to allow the
door to be opened fully.
The cooker should not be placed on a
base.
No shelf or overhang or cooker hood
shall be closer than a minimum of
650mm, but check with cooker hood
manufacturer’s recommendations.
The cooker must have a side
clearance above hob level of 90mm
up to a height of 400mm.
Dimensions
All sizes are nominal, and some
variation is to be expected. The
‘depth’ of the cooker, as given below,
is to the front of the door and
excluding knobs and handles.
Levelling the cooker
There are four adjustable feet on the
base of the cooker. Slacken the
locknut with an M8 spanner and turn
the feet by hand to adjust the height of
the cooker.
25
INSTALLATION INSTRUCTIONS
50EDO
60EDO
Width
502
600
Depth
600
600
Height
(adjustable)
900 - 930
900 - 930
Weight kg
(approx)
42(?)
50
08 27359 00 -Prestige EDO 13/9/07 15:58 Page 26
