3
Safety Labels Appearing On The Appliance
YOUR GRILL IS EQUIPPED WITH A BATTERY OPERATED IGNITION SYSTEM FOR EASIER
LIGHTING OF YOUR GRILL. THE SYSTEM USES SIMPLE 9 VOLT BATTERIES.
READ THESE GRILL AND ROTISSERIE LIGHTING INSTRUCTIONS BEFORE LIGHTING
- KEEP THE GRILL HOOD OPEN DURING THE LIGHTING PROCESS. MAKE SURE ALL THE
BURNER KNOBS ARE TURNED TO THE "OFF" POSITION.
- PUSH IN AND TURN THE KNOB TO THE HIGHEST POSITION SETTING.
- PRESS THE IGNITION BUTTON IN AND HOLD UNTIL THE GRILL BURNER IGNITES.
- IF IHE BURNER DOES NOT IGNITE WIIHIN 5 SECONDS, TURN THE BURNER TO THE "OFF"
POSITION AND WAIT 5 MINUTES. REPEAT THE ABOVE STEPS.
TO SAFELY SHUT DOWN THE GRILL, TURN ALL BURNERS TO THE "OFF" POSITION. FOR LP
GAS MODELS, IN ADDITION TO TURNING THE BURNERS OFF, TURN THE VALVE ON THE
GAS CYLINDER TO THE "OFF" POSITION WHEN NOT IN USE.
WARNING
ELECTRICAL GROUNDING INSTRUCTIONS
THIS APPLLANCE IS EQUIPPED WITH A THREE-PRONG GROUNDING PLUG FOR PROTECTION
AGAINST SHOCK HAZARD AND SHOULD BE PLUGGED DIRECTLY INTO A PROPERLY
GROUNDED RECEPTACLE. DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM THIS
PLUG.
DIELECTRIC TESTED
GAS LEAK
TESTED
