background image

10

APSRS PE1BZ_PE1BZLR Owners revB

 

LIMITED LIFETIME WARRANTY

Applies to Prestige Series Control Modules, Sirens, Sensors, and Relays.

Voxx Electronics Corporation (the Company) warrants to the original purchaser of this 

product that should this product or any part thereof, (other than transmitters) under nor-

mal use and conditions, be proven defective in material or workmanship during the life-

time of the vehicle, in which it was originally installed from the date of original purchase 

such defect(s) will be repaired or replaced with new or reconditioned product, (at the 

Company’s option) without charge for parts or repair labor. A transmitter is warranted for 

12 months from the date of original purchase.

To obtain repair or replacement within the terms of this Warranty, the product is to 

be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of 

defect(s), transportation prepaid, to an approved warranty station. This Warranty is not 

transferable.

This Warranty does not cover damage to the vehicle’s electrical system or costs 

incurred for removal or reinstallation of the product. This Warranty does not cover bat

-

teries, broken LCD or OLED display screens, nor apply to any product or part thereof 

which, in the opinion of the Company, has suffered or been damaged through alteration, 

improper installation, mishandling, misuse, abuse, neglect, accident, or by removal or 

defacement of the factory serial number/bar code label(s).

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WAR-

RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL 

BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. IN NO CASE 

SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL 

DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or rep-

resentative is authorized to assume for the Company any liability other than expressed 

herein in connection with the sale of this product.

The company does not warrant that this product cannot be compromised or circum

-

vented. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY 

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO 

EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID 

BY PURCHASER FOR THE PRODUCT WITHOUT COST OF INSTALLATION.

Some states do not allow limitations on how long an implied warranty lasts or the 

exclusion or limitation of incidental or consequential damage so the above limitations or 

exclusions may not apply to you. This Warranty gives you specific legal rights and you 

may also have other rights which vary from state to state.

Voxx Electronics Corporation, 180 Marcus Blvd., Hauppauge, New York 11788 / 1-800-645-4994

Summary of Contents for PE1BZ












Reviews: