128-9456
Page 1
PRESTIGE
IGN
AM
PM
Z
Z
24
S
1 2
INHIBIT
A
0
Lock/Arm
Unlock/Disarm
Trunk Release/ Remote Start
Option
F
Function Button
Model PE2RELCD
Operators Manual
RF Upgrade Kit
Check with your installation center for features and functions operational on your system.
To Operate System:
1) Press the lock button to lock the doors and arm the alarm if installed.
2) Press the unlock button to unlock the doors and disarm the alarm if installed.
3) Press and hold the Trunk/Start button for 3 seconds to unlock the trunk.
4) Press the Trunk/Start button two times in succession to start the vehicle. The vehicle will start
and run the predetermined time set up during installation (5 to 60 minutes selectable).
Anytime during the run cycle, enter the vehicle by first unlocking the doors with your transmitter,
insert your key and turn it to the run, NOT START, position, then step on the brake, the vehicle is
now in control of the ignition key.
NOTE:
For push to start vehicle systems, simply enter the vehicle with your key in hand, and
step on the brake.
Consult your installation center for operation and information on convenience options 1 & 2
which may have been connected or added to your vehicle.
PATENTED: www.voxxintl.com/company/patents
