128-8800b
4 of 4
4
To purchase replacement transmitters
or to get additional product information go to:
www.prestigecarsecurity.com
c) From b, press and release the valet/programming button 1 time to get to
channel 7, then press any unused transmitter button or button combination to
program.
Note:
Not all systems have channels above 3, check with your installation center
for options your system may or may not have.
Note:
Certain systems have the ability to utilize channels 6 & 7 for driver priority
programming. For driver priority, the vehicle must be equipped with this feature,
and the optional feature must be set up and installed by your installation center.
Once this feature is added when the unlock button of transmitter 1 is used, it will
set driver 1 priority, and when the unlock button of transmitter 2 is used it will set
driver 2 priority. In this situation, the unlock button can be programmed into two
receiver channels, unlock, channel 2 and driver priority 6 or 7. In no other circum-
stance will the system allow a transmitter button to be programmed into 2 re-
ceiver channels at the same time.
FUNCTION SETTING CHART
To be completed by installer
Run Time
5 Min
10 Min
15 Min
20 Min
While Running Unlock Yes
No
Lights
Pulse
Steady
© 2013 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788
128-8800b
