Prestigio Aero 1214
41
ENG
2. Remove the original gasket from its location in the bay.
3. Remove the backing from the new protective gasket.
4. Follow the instructions below, depending on which disk you are installing.
If you are replacing a 1.8" hard disk with a 2.5" hard disk:
•Stick the 2.5" protective gasket in the appropriate location (5) (see picture above).
•Insert the 2.5" hard disk into the case, attach it to the connector and replace the case cover and screws.
If you are replacing a 2.5" hard disk with a 1.8" hard disk:
•Place the foam bottom cover inside the bay.
•Stick the 1.8" protective gasket in the location illustrated (6) (see picture below) as per the approximate dimensions outlined.
•Attach the disk to the connector, place the foam top cover inside the bay and replace the case cover and screws.
Upgrading the Optical (CD/DVD) Device Drive
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the ODD release cover and remove the screw (1) and cover (2).
3. Use a screwdriver to carefully push out the optical device at point (3) .
4. Reverse the process to install the new device.
