59
Prestigio Cavaliere 141
Technical Service Manual
6. Remove the four screws fastening the LCD bracket on side of the LCD panel. (Figure 2-19)
Figure 2-19 Remove the LCD bracket
Reassembly
1. Attach the LCD bracket on the LCD panel and secure with four screws.
2. Fit the LCD panel back into place and secure with four screws, and reconnect the cable to the inverter board.
3. Fit the LCD frame back into the LCD housing and replace the four screws and four rubber pads.
4. Replace the LCD assembly and battery pack. (See section 2.2.1and 2.2.7 reassembly.)
