background image

6

Prestigio Cavaliere 141

Technical Service Manual

1.2.1 CPU module

Intel Mobile Pentium 4 Processors with 478 pins Micro-FCPGA package.

The first Intel mobile processor with the Intel NetBurst micro-architecture which features include hyper-pipelined 
technology, a rapid execution engine, a 400MHz system, an execution trace cache, advanced dynamic execution, 
advanced transfer cache, enhanced floating point and multi-media unit, and Streaming SIMD Extensions 2 (SSE2). 

The Streaming SIMD Extensions 2 (SSE2) enable break-through levels of performance in multimedia applications 
including 3-D graphics, video decoding/encoding, and speech recognition.

Use Source-Synchronous Transfer (SST) of address and data to improve performance by transferring data four times 
per bus clock.

Support Enhanced n two performance modes. 

1.2.2 Synthesizer

System frequency synthesizer:ICS952001

Programmable output frequency, divider ratios, output rise/fall time, output skew.

Programmable spread percentage for EMI control.

Watchdog timer technology to reset system if system malfunctions.

Programmable watchdog safe frequency.

Support I2C Index read/write and block read/write operations.

For DDR SDRAM system use the ICS93705 or ICS93722 as the memory buffer.

Use external 14.318MHz crystal.

Summary of Contents for CAVALIERE 141














































































































































Reviews: