1.6.4 Security Menu Setup
P hoe n i xBI O S Se tup U tilit y
Main
Advanced
Security
Boot
Exit
Item Specific Help
Set Supervisor Password
[Enter]
Supervisor Password
Set User Password
[Enter]
controls access to the
setup utility.
Password on boot
[Disabled]
Fixed disk boot sector
[Normal]
Diskette access
[Supervisor]
F1 Help
á
â
Select Item
-/+
Change Values
F9 Setup Defaults
Esc Exit
ßà
Select Menu
Enter
Select
4
Sub-Menu
F10 Save and Exit
•
Set Supervisor Password
Supervisor password gives you the authority in accessing the setup utility.
You also need to enter this password in system booting and resuming from
suspend mode. When you press <
Enter
> in this field, the Set Supervisor
Password dialog box appears. Enter a new password with up to 8 alpha-
numeric characters, and then re-enter it for confirmation.
•
Set User Password
This field is only available when Supervisor Password has set. Enter the user
password when boot the system or resume from suspend mode. But if the
Write Protect is set in the Fixed disk boot sector field, you should enter a
supervisor password to access the fixed disk when boot the system or resume
from suspend mode.
•
Password on Boot
If you set this field to Enabled, your computer will always ask for the
password every time you boot your computer.
•
Fixed Disk Boot Sector
If you set this field to Write Protect, the write protect boot sector on hard disk
will protect against viruses. In this situation, only the supervisor can access
the Boot Sector of fixed disk.
•
Diskette Access
If you set this field to Supervisor, only the supervisor can access to the
diskette drives. If you set to User, both the supervisor and user can access to
the diskette drives.
TECHNICAL SERVICE MANUAL
Prestigio Cavaliere 142
20
