•
Exit Discarding Changes
Allows you to discard all changes made while running the BIOS setup
program and exit from the system setup program.
•
Load Setup Defaults
Lets you load the default values for all setup items.
•
Discard Changes
Reverts to previously selected settings.
•
Save Changes
Saves Setup data to CMOS.
•
Battery Refresh
Conditions the battery so that the battery can be fully charged.
1.6.7 How to Upgrade the BIOS
Your computer uses EPROM Flash BIOS chip that allows you to easily upgrade the BIOS
program. When you update the BIOS, any customized settings you made are lost.
To upgrade the BIOS:
1.
Insert the BIOS Update diskette into the diskette drive.
2.
Power on the system with the diskette in the diskette drive.
3.
On the DOS prompt, type the following command.
A:\>Phlash
XXXXXX.ROM
(
BIOS filename)
or
A:\>
XXXXXX.BAT
(
Batch file for BIOS file)
4.
Press <Enter> to run this BIOS utility. After the system has been successfully
run this program, a message similar to the following appears:
Flash memory has been successfully programmed, press any key to restart the
system. If the system does not restart, turn it off, then turn on again.
5.
Press any key to restart this system.
Contact your dealer for the latest BIOS update file.
TECHNICAL SERVICE MANUAL
Prestigio Cavaliere 142
22
