5.5.5 Removing the Heat Sink and Sub-board
1.
Removing the heat sink, there are four screws and one FAN cables as the picture shown.
Figure 5-11 Removing Heat Sink and Sub-board
5.5.6.
Removing the Intel CPU
The Cavaliere 142 features Intel Pentium M uFC-PGA Processors. It is located on the upper left side
of the system motherboard.
To install or replace the CPU, follow the steps below:
1.
Before removing the CPU module, you need first to disassemble keyboard and heat sink
plate.
2.
Using a flat screwdriver, turn the socket lock counter-clockwise direction to unlock CPU
from the socket.
Figure 5-12 CPU Assembly
TECHNICAL SERVICE MANUAL
Prestigio Cavaliere 142
94
