background image

PRESTO OWNER’S MANUAL        

 Page 2

          POWER STAK  

This manual was current at the time of printing. To obtain the latest, most updated version, please contact the      

Customer Service Department or go to our website: www.PrestoLifts.com -- you will find a complete list of cur

-

rent Owner’s Manuals to print.

Presto Lifts Limited Power Stacker Warranty Policy

Presto Lifts warrants the Power Stacker against defects on the mast, fork carriage, chains, pumps, 

DC motors, controllers, cylinders and wiring harnesses from faulty material and workmanship for a 

period of one (1) year from the date of invoice.

All wear items such as batteries, wheels, motor brushes, seals, bearings, hydraulic hoses, all switches, 

battery chargers and forks have a limited warranty against defects in faulty material and workmanship 

for a ninety (90) day period from the date of invoice and 30 day limited warranty on labor. Please 

note that prior authorization from Presto Lifts is required on all warranty work.

There are no implied warranties of any kind, more specifically; there are no warranties of merchant

-

ability or fitness for any particular purpose. Presto Lifts’ sole warranty shall be as set forth in this 

limited warranty. Presto Lifts will elect to repair or replace a defective component without charge, 

if any components should become defective within the limited warranty period. Proof of purchase is 

required for warranty. The charge for shipping the defective component is the responsibility of the 

buyer and must be accompanied with an RGA number. The shipping charge to return the component 

to the buyer is the responsibility of Presto Lifts, Inc.

This limited warranty does not cover labor expense for removal or reinstallation of components

after thirty days. This limited warranty shall not cover, among other things: damages resulting

from foreign matter or water, failure to provide reasonable and necessary maintenance, and if

applicable, use of product while charger is plugged into an AC outlet, or failure to follow operat-

ing instructions. The limited warranty is not valid for damage resulting from negligence, accident, 

unreasonable use, abuse or misuse, exceeding data plate capacities or altering the product without 

Presto Lifts authorization.

Presto Lifts expressly disclaims and excludes any liability for consequential, incidental, indirect

or punitive damages or financial loss to people or property resulting from any breach of warranty or 

the operation or failure of this product.

Presto Lifts makes no representation that this product complies with local, state, or federal safety/

product standards codes. Should this product fail to comply in any way with those codes, it shall 

not be considered a defect of materials or workmanship. Presto Lifts shall not be held liable for any 

damages resulting from noncompliance. It is the dealer’s responsibility to exercise this limited war-

ranty. This limited warranty is provided to the original purchaser (defined as the original end user) 

and is nontransferable. This constitutes the complete and final agreement involving Presto Lifts and 

limited warranty obligations for products.

Summary of Contents for Power Stak PPS2200-62NFO-21
































Reviews: