PRESTO OWNER’S MANUAL
Page 11
POWER STAK PPS2200-62 NFO-21
DAILY OPERATOR CHECK LIST
CHARGE CONDITION/BATTERY CHECK LIST
1. Check Battery Discharge Indicator (Fuel Gage and Hour Meter) – Be sure unit is
showing
proper Charge Level
before operating unit
2. Check to be sure
Charging Cord
is
Unplugged
and properly stowed before oper-
ating unit
3. Inspect Battery Wire Connections – All connections should be tight with
No Cor-
rosion
(white powder) showing at the
Battery Terminals
4. Inspect Battery Case – There should be
no cracks or visible damage
to the
Bat-
tery Case
WALK AROUND INSPECTION
1. Check general condition of Stacker (loose or broken parts, oil, dangling wires,
dents, cracked covers etc.)
2. Check metal frame, mast, carriage and font load supports for cracked welds, worn
or flat rollers, loose or disconnected chains, loose pins, missing snap rings, and
loose or missing hardware – bolts, nuts washers etc.
3. Check for evidence of hydraulic leaks
4. Make sure all precautionary labeling is in place and legible
FUNCTIONAL INSPECTION
1. Check Drive – Forward and Reverse Function
2. Check Lift – Up and Down Function
3. Check Function for Belly Button Reverse
4. Check Horn Function
5. Check Brake Function
OPERATOR ID ______________________________________
DATE ______________________________
DO NOT USE OR OPERATE STACKER IF ANY FUNCTION IS NOT
OPERATING PROPERLY OR IF STACKER APPEARS UNSAFE IN ANYWAY
REPORT CONCERNS TO SUPERVISOR IMMEDIATELY!
