2
15. It is recommended that this fryer not be moved when it contains hot oil or other hot liquid. If it must be moved when it contains hot
oil or other hot liquid, use extreme caution.
16. Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS
ThIS PRoDUCT IS FoR hoUSEhoLD USE onLy.
Important Cord and Plug Information
A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
DO NOT
USE WITH AN EXTENSION CORD.
Do not allow the cord to run underneath or around the unit. The magnetic cord may not detach easily if the cord is positioned in this fashion.
Connect the power supply cord to a 120VAC electrical outlet only.
Before First Use
Become familiar with the various parts of the deep fryer (Fig. A1) and read the instructions carefully.
Remove all packing material and disassemble unit for cleaning. Take the fry basket out of the unit. Remove the cord assembly from the
basket and set aside. Then, lift the control assembly out of the unit. Wipe the control assembly (control unit with heating element) with
a damp cloth.
Never immerse the control assembly, cord, or plug in water.
Lift the removable pot out of the base and wash the pot,
fry basket, and fryer cover in warm, sudsy water. Rinse and dry thoroughly.
Reset Button
The deep fryer is equipped with a sensor which will automatically shut the unit off if it is overheated. overheating can occur if the unit
is heated without or with insufficient oil. It can also occur if using solid fat or older oil that has become thick. Should the unit shut off,
unplug and allow the unit to cool. Correct the cause of overheating. Then with the tip of a pen, press the red RESET button on the back
of the control unit (Fig. A2). The unit will not operate until it is reset.
Cover vents
Fryer cover
Magnetic
cord assembly
Control
assembly
(Control unit with
heating element)
Removable
pot
Maximum and
minimum levels
Thermostatic
control
Ready light
Power light
Fry basket
Basket lowering
button
Basket
handle
Carrying
handle
Base
Handle
Carrying
handle
BACk VIEW OF CONTROl UNIT
Fig. A2
Red
Reset
button
Electrical
pins
Fig. A1
Model
number
& series
code
Handle slots
