13
Press the
New Lens
key (Fig 6.7) and you will be asked to select the focal length (Fig 6.10),
and Serial Number (Fig 6.11). When finished, press
Next
and the lens name (18mm s/n
123) appears in the lens type folder (Fig 6.12). Note that the lenses are automatically
sorted in ascending values of the focal length.
To calibrate the lens press
Edit
(Fig 6.12). Select
Calibrate
with the Nav key (Fig 6.13), and
press
OK
or ENTER).
After the lens focus ring is set to infinity (Fig 6.14), the display indicates the first of ten
calibration distances- close focus. There are two versions of this display screen, one for
lenses with linear focus mechanisms, and a second for lenses with non-linear focus.
Choosing a lens type automatically brings up the corresponding display screen.
The display screen for lenses with linear focus mechanisms allow the user to scroll up
and down with the Nav key (Fig 6.15, and 6.16).
The display screens for non-linear lenses show fixed distances for each calibration point
as shown in Fig. 6.18 – 6.20.
Fig 6.10
Fig 6.11
Fig 6.12
Fig 6.15
Fig 6.16
Fig 6.17
Fig 6.13
Fig 6.14
Fig 6.18
Fig 6.19
Fig 6.20
