7
The Signal Strength bars will appear. To return to the main menu, press the Nav
key left.
e.
To use a blank focus marking ring, turn off the Focus mapping:
Press the
Menu key
.
Select
Lens.
If the focal length and serial number of a lens appears to the right of “Lens”,
press
Fmap OFF
.
The HU3 is now ready for basic operation. The blank focus marking ring,
and iris marking strip can be used to mark lens calibrations.
f.
Focus mapping eliminates the need to manually mark separate rings for each lens.
Data from the lens library is matched to pre-printed focus marking rings. This
makes process of lens changing quick and efficient. A detailed description of this
function showing the display screens is given in section III. To load focus data for a
lens and select a focus ring:
Press the Menu key.
Use the Nav key to select Lens.
Press Choose.
Select the lens location (All lenses, My List A…..)
Select the lens and press
OK
or the Enter key (the center of the Nav key).
Set the lens to infinity (as directed) and Enter/Next.
Press Ring and choose a focus ring with the desired near focus.
Install the same focus ring on the focus knob.
