Compatibility
The
n-ABLER
works with USB and PS/2 compatible computers. This includes the majority of
Personal Computers (PCs), Apple Macintosh computers and Chromebooks. PS/2 sockets are
circular with 6 pins, whereas USB connectors are rectangular with 4 pins.
Installation
USB (Preferred connection method)
Having located an available USB socket, simply plug your n-ABLER into it. It doesn’t matter whether
the computer is on or off. The first time you install n-ABLER the operating system may take a few
seconds to build a driver. Your n-ABLER is available for use as soon as its green LED lights. There are
no driver files to load onto the computer- the computer’s resident drivers are used to help simplify
installation.
PS/2
Make sure your computer is fully turned off and not just in standby. Insert the USB plug of n-ABLER
into the supplied PS/2 adaptor and then plug it into the PS/2 socket, ensuring that the socket in
question is for a mouse and not for a keyboard. This can usually be identified either because it is
green (as opposed to purple for keyboard sockets) or it may be identified with a mouse symbol.
When you switch on your computer your n-ABLER automatically configures itself to PS/2 mode.
There are no driver files to load onto the computer- the computer’s resident drivers are used to help
simplify installation.
