PRETUL 28114, Manual

4

General Safety Warnings

for Motor Tools

ENGLISH

Keep your work area clean, tidy and well lit.

Cluttered and dark areas may cause accidents.

Never use the tool in explosive areas or in the presence 

of flammable liquids.

Before starting the motor keep the tool at least
9 meters (30 feet) away from the fill up area.

Keep children and passersby at a safe distance while 

operating the tool.

Distractions could cause loosing control and cause 
accidents.

Avoid contact with power lines and circuits.

Find and avoid power lines and circuits, especially 
hidden wiring as well as any grounded object.

Stay alert, use care and common sense.

Familiarity with the tool operation could lead to 
distractions. It could cause accidents.

Refrain from using the tool if tired or under the 

influence of drugs, alcohol or medication.

Being momentarily distracted while using the tool could 
cause severe personal injury.

Operate the tool with guards and protection devices in 

place and in good working condition.

Failure to comply with this warning is a hazard of severe 
personal injury.

Do not force the tool.

Working within the tool’s working design assures
a better and safer job.

Keep the tool in a safe place and out of the reach of 

children.

Motor powered tools are dangerous to
inexperienced people.

Wear proper clothes.

Loose clothes, jewelry or long hair could get
caught in the mobile parts.

Keep hands away from rotating and/or mobile parts.

Failure to comply with this warning is a hazard
of severe personal injury.

Do not operate the tool in enclosed areas.

Avoid breathing accumulated carbon monoxide, a 
potentially deadly odorless toxic gas.

Wear adequate protective safety accessories.

Wear eye protection, dust mask, non-skid safety shoes, 
helmet and ear plugs. These safety gears reduce the risk 
of injury.

Turn off the tool before adjusting, changing accessories 

or storin.

Double check the tool switch is in the off position.

Refrain from operating the tool if the switch is not 

working or is not properly assembled.

Failure to complain with this warning is a hazard of 
personal injury. Immediately send it to a
                              Authorized Service Center.

Do not overreach.

Good balance and support lead to better controlling the tool 
in unexpected situations.

Avoid the tool to unintentionally start.

Double-check the tool motor is off
before maintenance or putting it away.

Remove brackets before turning on the tool.

Additional tools or vices installed in a rotating part could 
cause severe personal injury.

Service the tool and double-check it is in good working 

conditions before operating.

Carefully check mobile parts, alignment and assembly. 
Do it periodically. Look for any damaged element or part 
not working properly. Repair immediately in a
                              Authorized Service Center.  

Accessories.

Use only accessories or spare parts indicated in this 
Manual or certified by                              .

Never leave a running tool unattended.

Turn off and disconnect the tool after using. Set it in a 
safe position to avoid severe injury.

Never smoke in the proximity of fuel.

Do not smoke in the proximity of the fuelling
area or when using the tool.

Do not touch parts with high temperatures.

The surface of the engine and the exhaust reach high temperatures during the 
operation of the tool..

Service and repair.

Always go to a                                Authorized Service Center to use identical spare 
parts and maintain the security of the tool.

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

DANGER

DANGER

DANGER

DANGER

DANGER

DANGER

DANGER

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING