manualshive.com logo in svg

PREVOST H 2018 Series, Operator'S Manual

The PREVOST H 2018 Series Operator's Manual is a comprehensive guide designed to assist users in operating and maintaining their product. This manual can be easily accessed and downloaded for free from our website, ensuring that users have the necessary information readily available.

Share
Download
background image

OTHER FEATURES 

    

5-47

 

 

PA1628 H3-41, H3-45 Operator’s Manual 

SEATS RECONFIGURATION 

To accommodate a wheelchair, one row of seats 
must be folded and two rows must be folded 
and slid away. Seats may be folded on both 
sides of the coach to make room for a second 
wheelchair.  

 

POSSIBLE SEATING ARRANGEMENT  

Electrical wheelchair or tri-wheeler may require 
moving the sliding seats on both sides of the 
coach to allow enough turnaround space. 

 

FOLDING AND SLIDING SEATS 

 

To fold a set of seats, raise the seat back then 
lift up the seat cushion (pull on lever 1).  To slide 
a row of seats, remove the black covers from the 
floor tracks.  Pull the lever 2 while sliding the 
seat along the track. 

WHEELCHAIR RESTRAINT SYSTEMS 

Two types of wheelchair restraint systems may 
be found, depending on the type of seats: 

1.

 

4-point wheelchair and occupant 
securement with floor anchorage. 

2.

 

4-point wheelchair and occupant 
securement with anchorage to 
passengers seat pedestals. 

Refer to Q’Straint publications included in the 
wheelchair restraint plastic pouches for further 
details. 

4-POINT SECUREMENT WITH FLOOR 
ANCHORAGE 

This securement system includes: 

 

4 wheelchair tiedown retractors to secure 
wheelchair to vehicle floor. 

 

Occupant securements: lap and shoulder 
belts that integrate to the rear wheelchair 
restraints. 

 

Floor anchorages; installed on the vehicle 
floor. 

Two complete sets of wheelchair restraints are 
kept in plastic pouches and stowed in an 
overhead compartment. To secure each 
wheelchair, four tiedown retractors must be 
used (at all four corners). 

Two of the four tiedown retractors have 
attaching pins to secure the occupant’s lap belt. 
They must be placed at the rear of the 
wheelchair. Each tiedown retractor slots into a 
mounting floor pocket. 

 

WHEELCHAIR ANCHORAGE SYSTEMS 

   23266  

To anchor the retractors, lift the floor pocket 
cover, push in the retractor anchor then slide it 
until it locks in place. Hook one wheelchair 
restraint belt to each corner of the wheelchair 
frame 

(not the wheels)

 and allow the retractors 

to tension the belts. 

Summary of Contents for H 2018 Series



































































































































































































































































Reviews:

No comments

Related manuals for H 2018 Series

Brands by name

Popular brands

Load more brands