manualshive.com logo in svg

PREVOST H 2018 Series, Operator'S Manual

The PREVOST H 2018 Series Operator's Manual is a comprehensive guide designed to assist users in operating and maintaining their product. This manual can be easily accessed and downloaded for free from our website, ensuring that users have the necessary information readily available.

Share
Download
background image

SAFETY FEATURES AND EQUIPMENT     7-3 

 

PA1628 H3-41, H3-45 Operator’s Manual 

EMERGENCY EXITS 

Locate and learn how to use all possible 
emergency  exits.  It  is  good  practice  to  inform 
passengers of the location of exits and how to 
use them in case of an emergency. 

SIDE WINDOWS 

Some side windows can be open from the inside 
for emergency exit.  A decal located on the 
bottom of each passenger window indicates the 
location of the nearest emergency exit.  Also, 
blue lights close to the wall in the overhead 
storage compartments illuminate the 
emergency exit decals.  These lights illuminate 
when the general lighting switch is on. 

 

EMERGENCY EXIT WINDOWS (H3-41)  

18520

 

 

EMERGENCY EXIT WINDOWS (H3-45)  

18519

 

To open a side window emergency exit, tilt up 
the release bar and push the bottom of the 
window outwards, as illustrated below.  The 
window is hinged from the top and will not fall 
out.   

A telltale light on the dashboard illuminates 
when a window is opened.  Refer to Section 4 

Controls and instruments

 for more information.

 

To close the window, tilt up the release bar and 
pull the window back.  Push down the release 
bar to lock shut. 

 

SIDE WINDOW EMERGENCY EXIT

 

18391

 

ROOF HATCH 

A roof ventilation hatch, designed to be opened 
by occupants may be installed in the roof at the 
rear of the vehicle. Another optional roof hatch 
may be located in the front of the vehicle.  The 
hatches can serve as emergency exits. In case of 
an emergency, push the ventilation hatch 
upwards (1).  Turn knob ¼ turn (arrow pointing 
“TO EXIT”) and then push knob to release the 
hatch (2). Push the escape hatch outwards (3). A 
decal with operating instructions is located on 
the hatch. 

 

 

Summary of Contents for H 2018 Series



































































































































































































































































Reviews:

No comments

Related manuals for H 2018 Series

Brands by name

Popular brands

Load more brands