manualshive.com logo in svg

PREVOST H 2018 Series, Operator'S Manual

The PREVOST H 2018 Series Operator's Manual is a comprehensive guide designed to assist users in operating and maintaining their product. This manual can be easily accessed and downloaded for free from our website, ensuring that users have the necessary information readily available.

Share
Download
background image

 

 

FOREWORD     iii 

PA1628 H3-41, H3-45 Operator’s Manual 

EVENT DATA RECORDING DEVICES 

This PREVOST vehicle is equipped with a device generally referred to as an "event data recorder" or 
"EDR." Please note that while the term "event data recorder" is typically used throughout the motor 
vehicle industry, not every EDR is the same; i.e., they do not all record the same data elements. 

The EDR on this PREVOST vehicle records vehicle speed, engine RPM, time and date, plus a variety of 
pedal and switch positions, both before and after an "event." Sudden vehicle deceleration or the 
occurrence of certain other vehicle operational characteristics will define (trigger) an "event." 

For any questions about this vehicle EDR device, contact a PREVOST Service Center or a regional 
service manager. 

TELEMATICS DEVICE  

Your vehicle is equipped with one or more recording devices (“Telematics Device”), associated with 
Prevost’s Connected Vehicle Services (the “Telematics Services”). These services, which are described 
in greater detail at 

www.prevostcar.com

  (the “Website”), allow you to manage vehicle maintenance and 

repair in a cost-effective manner by providing: proactive diagnostic and repair planning assistance with 
detailed analysis of diagnostic trouble codes; streamlined service procedures with parts-on-hand 
confirmation before a vehicle arrives for service; and live repair and customer communication. The 
service eliminates or reduces diagnostics time, enhances repair  efficiency, expedites decision process, 
improves communications and maximizes uptime. To access the Telematics Services, you must enter 
into a Telematics Subscription Agreement with Prevost, via the sales agreement pertaining to your 
vehicle. 

The Telematics Device collects stores and/or transmits information about your vehicle. Such information 
may include direction and rate of speed, fuel consumption, engine performance, gearing, rpm, altitude, 
geo-location (including a history of where the vehicle travels), safety information related to the use and 
operation of the vehicle, vehicle performance, diagnostic data and error codes. The Telematics Device 
has the capacity to store historical data about the use and performance of your vehicle. The Telematics 
Device has the ability to transmit information to a central communications system. The information 
contained in your Telematics Device may be periodically transmitted to or accessed by Prevost and 
others authorized by Prevost, along with your vehicle’s VIN number or other identifying information. 
Prevost does not collect any driver information. Prevost retains and uses this information to understand 
the operational use of your vehicle, to remotely tune your vehicle, and to help facilitate maintenance and 
vehicle improvements. To the extent allowed by law, Prevost reserves the right to access, use and control 
this information.  

Declining to enter into a Telematics Subscription Agreement with Prevost, or canceling a 
Telematics Subscription Agreement, will not end the transmission of data from your Telematics 
Device or the collection of information by Prevost. Prevost may access Telematics Data, to the 
extent it is available, and use it in connection with providing services and vehicle improvements 
to you and your vehicle. Prevost will regularly purge from its systems all data collected from your 
Telematics Device, at time intervals determined by Prevost at its sole discretion. 

 

Summary of Contents for H 2018 Series



































































































































































































































































Reviews:

No comments

Related manuals for H 2018 Series

Brands by name

Popular brands

Load more brands