PREVOST H 2018 Series Operator'S Manual Download

Page: 51 / 258

CONTROLS AND INSTRUMENTS 4-9

PA1628 H3-41, H3-45 Operator’s Manual

NOTE

The

CRUISE

switch and

RESUME

button do not

operate at speeds below 30 mph (50 km/h).

CRUISE CONTROL BUTTONS

SETTING AT A DESIRED SPEED

Accelerate the vehicle to the desired cruising
speed using the accelerator pedal. Press and
release the

SET

button then remove foot from

the accelerator pedal. This will set the vehicle
cruise speed and store it in memory. The set
speed will appear in the driver information
display.

INCREASING SET SPEED

The vehicle cruise speed setting can be
increased by one of the following methods.

Accelerate using the accelerator pedal until
the desired cruising speed is reached. Press
and release the

SET

button.

Press and hold the

RES

(RESUME) button

until the desired cruising speed is reached.
When the

RES

button is released, the new

cruising speed will be stored in the cruise
control memory.

When driving with cruise control, each time
the

RES

button is momentarily depressed,

the cruising set speed is raised by 1 mph (2
km/h).

NOTE

When driving with cruise control, the vehicle
can still be accelerated by depressing the
accelerator pedal in the usual manner. Once
the accelerator pedal is released, the vehicle
will return to the previously set cruising speed.

DECREASING SET SPEED

The vehicle cruise speed setting can be
decreased by one of the following methods.

Press and hold the

SET

button until the

desired cruising speed is reached. When the

SET

button is released, the new cruising

speed will be stored in the cruise control
memory.

Each brief pressing of the

SET

button will

decrease set cruising speed by 1 mph
(2 km/h).

Slightly apply the service brake and when
desired cruise speed is reached, press and
release the

SET

button.

CANCELING THE SET SPEED

You can cancel the set cruising speed by:

Pressing momentarily the

CANCEL

button;

Depressing the brake pedal.

RESUMING SET SPEED

If the set speed is cancelled by pressing the

CANCEL

button or depressing the brake pedal,

pressing the

RES

(RESUME) button will restore

the speed set prior to cancellation, providing
that your speed is above 30 mph (50 km/h).

Summary of Contents for H 2018 Series



































































































































































































































































Search results

Summary of Contents for H 2018 Series

Reviews:

Related manuals for H 2018 Series

Brands by name

Popular brands

PREVOST H 2018 Series, Operator'S Manual

Search results

Summary of Contents for H 2018 Series

Reviews:

Related manuals for H 2018 Series

Brands by name

Popular brands