Coach Interior
24
TOUR GUIDE SEAT
TOUR GUIDE SEAT
18347
The optional folding tour guide seat is equipped
with a retractable arm rest and safety belt. The
seat can be folded up for convenience when
embarking and disembarking passengers.
The tour guide seat can be removed and stored
in the first baggage compartment. To remove the
seat from the stairwell wall, unscrew and remove
the two anchoring pins and washers at the bottom
of the seat assembly. Raise and unhook the seat
assembly.
DANGER
Make sure tour guide's safety belt is buckled up
prior to departure.
MICROPHONE JACKS
Up to six microphone jacks for the PA system can
be located in the following locations:
•
On the side wall of the driver's control panel;
•
On the right hand side of the dashboard;
•
One optional outlet for the tour guide on
each of the modesty panels;
•
One optional outlet on the lavatory wall,
behind the last row of seats;
•
One optional outlet under the overhead
storage compartment, at the rear of the
coach.
PASSENGER SEATS
Passenger seats may be equipped with grip
handles, ashtrays, newspaper holders, trays, cup
holders and footrests.
PASSENGER SEAT EQUIPMENT
18121A
All seats are track-mounted so that the seating
configuration can be changed. Each set is
mounted on rectangular aluminum bases to make
cleaning between the base and side wall easier.
Passenger seat backrests can be tilted by using
the push-button located on the base of the seat.
Depress and hold push-button, then adjust
backrest to the desired angle. Release push-
button to lock backrest in position.
A folding armrest is installed on the aisle side of
the passenger. Another folding armrest is located
between the two seats and can be raised for
passenger convenience. A fixed armrest is
installed on the window side of the seat.
SWIVEL SEATS
The coach may be equipped with two sets of
swivel seats to allow installation of card tables.
The swivel seat can be rotated for passenger
privacy. To rotate seats, unscrew the wing nut
from under each seat cushion then remove
cushions. Remove the four wing screws, pull
seats toward the aisle and rotate the seat
counter-clockwise. Align mounting holes, secure
with wing screws and install seat cushions.
NOTE
Instructions for making swivel seat adjustments
are affixed on the rear frame under the seat
cushion.
FOLDING TRAYS
Two optional folding tray models can be installed
in the coach.
Summary of Contents for X3-45 2011
