Controls and Instruments
PA1627 X3-45 Operator’s Manual
4-5
(MCD). Maintain the switch in this position when
parked overnight or for an extended period.
19T
NOTE
The battery master switch is on when the
hazard flashers are activated, even if the key
is in the off position.
ON
To place ignition switch to
ON
, turn the key
clockwise to the first position. The key cannot be
removed when in this position.
The electrical circuits activated when the switch
is in the
ACC
position plus the transmission,
engine and accessories, ABS system, wipers,
dashboard cluster gauges and buzzers, air horn
and air dryer heater are activated when the
switch is in this position. Do not leave the key in
this position unless the engine is running.
START
Turn the key clockwise to the second position
and release as soon as the engine starts. The
key will return to the ON position. If the engine
did not start, return the ignition key to the OFF
position before trying to restart the engine.
The ignition switch is equipped with a starter
protection which inhibits turning the key to the
START position if the key has not previously
been turned to the OFF position.
CAUTION
To avoid overheating the starter, do not
engage the starter for more than 15 seconds
at a time. Allow the starter to cool before trying
to restart the engine.
CAUTION
If the “starter on” indicator light remains
illuminated even after releasing the ignition
switch, stop the engine immediately and set
the battery master switch (ignition switch) to
the off position. Have the starter checked
immediately.
The features activated when the engine is
running are all those described above plus the
HVAC system and daytime running lights.
DANGER
Do not
use ether or other combustible
starting aid fluid on any engine equipped with
an intake air preheater. If the engine is
equipped with a preheater, introduction of
ether or similar starting aids could cause a fire
or explosion resulting in severe property
damage, serious personal injury or death.
Summary of Contents for X3-45 2017
