OTHER FEATURES 5-29
PA1633 X3-45 Commuter Operator’s Manual
WHEELCHAIR LIFT SYSTEM
Read and understand the RICON
Service/Owner Manual before attempting to use
the wheelchair lift. The instructions below are a
quick reference and serve to complement the
information provided by RICON.
WARNING
To operate the optional wheelchair lift, the
coach must be parked on a flat and level
surface, with the parking brake applied and
the transmission in neutral gear.
Activate the lift mechanism circuit by pressing
down on the wheelchair lift system power switch
on the dashboard.
NOTE
Vehicle flashers will activate when pressing
the WCL power switch.
WHEELCHAIR LIFT SYSTEM DOORS
To open the wheelchair lift system doors, the
coach must be parked on a flat and level surface
with the parking brake on and transmission in
neutral gear.
WHEELCHAIR LIFT SYSTEM DOORS
Unlock the lift access door by rotating the T
handle (A). The lift access door is located
directly below the wheelchair access door. If the
parking brake is not activated, a switch in the
door will activate the parking brake when it
detects the door is open.
The wheelchair area door is fitted with an
electric lock and will unlock when the lift reaches
intermediate height.
In the event of a power loss, unlocking the door
is possible from inside the vehicle.
Release door lock by turning the slotted
emergency unlock mechanism.
EMERGENCY UNLOCK ON WHEELCHAIR AREA DOOR
Slide the wheelchair area door completely until it
locks in the open position at the end of stroke.
To close the door, pull on the handle (B) to
release the locking mechanism and slide back
the door in closed position.
A light inside the vehicle illuminates the doorway
when the wheelchair access door is open.
A pictogram appears on the DID when the lift
mechanism access door or the wheelchair
access door is open. Refer to Controls and
Instruments section.
When either the lift mechanism access door or
the wheelchair access door is open, the parking
brake cannot be released and the transmission
gear selector will not register any gear selection.
NOTE
The activation switch must be in the ON
position for this interlock feature to be in
effect.
Summary of Contents for X3-45 COMMUTER 2018
