SECTION 00: GENERAL INFORMATION
6
DOB 2490-2789
|
X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)
- Material and parts conform to ASTM and/or
SAE standards in effect at the time of
manufacture.
- All factory-installed interior materials meet
FMVSS 302 for fire resistance.
- Certified according to Provincial, State and
Federal Safety standards (Canadian and US)
BMCSS, FMVSS, and CMVSS.
Other applicable certification labels are affixed to
the component.
4.1.8 DOT Certification Label
This certifies that vehicles manufactured by
Prevost Inc., comply with all Federal Motor
Vehicle Safety Standards at the time of
manufacture. Information such as date of
manufacture, model year, gross vehicle weight
rating, tire types and inflation pressure is also
etched on this plate. The DOT Certification plate
is affixed to the side of the L.H. control panel.
FIGURE 6: DOT CERTIFICATION PLATE
00016
4.1.9 Fuel Tank Label
The fuel tank label is molded on the side of the
fuel tank. To read this label, unscrew the fuel
tank access panel nuts located at the left in the
condenser compartment.
4.1.10 Vehicle Identification Number (VIN)
The seventeen digit vehicle identification
number (VIN) is located on a plate (Figure 8)
located on the windshield frame pillar (Figure 7).
The VIN is visible from the outside of the
vehicle. Make sure the correct vehicle
identification number is given when ordering
replacement parts. Using the VIN when ordering
parts will facilitate processing.
FIGURE 7: VEHICLE I.D.
00048
NOTE
Record the VIN in the vehicle documentation
and keep with company records. The VIN will
normally be used for vehicle registration and
for obtaining vehicle insurance coverage.
