SECTION 18: BODY
DOB 2490-2789 | X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)
43
15.5.1 BAGGAGE
COMPARTMENT DOORS (ALUMINUM)
For the removal and installation of a baggage
compartment door body panel, you will need:
A drill with drill bits;
Pneumatic hammer tool (Zip Gun);
Razor sharp window scraper or putty knife;
Open damaged compartment door and
unfasten rub rail fixing bolts. Remove rub
rail.
Unfasten bolts and disconnect cable if
necessary in order to remove door from
vehicle.
Preferably install the door onto a work
surface where it can be solidly fixed.
Door Panel replacement
Refer to SAV10054-67.
Baggage Compartment Door Adjustment
Adjust door to get a 6mm gap at the top.
All adjustments are to be made with door
closed, unless specified.
NOTE
Vertical adjustment is achieved by moving the
door along the mounting plate slots.
Center door in the opening using the
retaining rings.
NOTE
Lateral adjustment is made by adding/
removing retaining rings in these locations.
