SECTION 18: BODY
44
DOB 2490-2789 | X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)
Adjust door position and evenness with
reference to adjacent panels and doors.
NOTE
Adjustment is made by moving IN or OUT the
lock plates. Adjust one corner at a time.
Check handle adjustment. Handle must
remain tight against its plastic housing.
NOTE
Adjustment is made by moving UP or DOWN
the lock plates.
Open baggage compartment door and
adjust using the cylinder mounting block.
Door should be adjusted in reference to
neighboring doors.
Target is to have 5 ½” (140mm) from bus
body panel to door panel and +/- 2mm
vertically between doors.
