Mi14-01A Page 30 / 31
Rev: June 26, 2014
6.
DOB 2400 – 2489
: Lift the tow bar until the
axle forks grab the side-members (fig.61).
DOB 2490 – 2789:
Lift the tow bar until the
axle forks fit snuggly into the side-members
tow eyes.
Avoid lifting at the side-members further
toward the rear of the bus (close to the
bumper)
FIG.61 PROPER LOCATION WHEN LIFTING THE SIDE-
MEMBERS
7. Place the fork’s shorter finger outboard for
better clearance (see fig. 62).
FIG.62 PROPER LOCATION WHEN LIFTING THE SIDE-
MEMBERS – ON THIS PICTURE, THE BUS IS EQUIPPED
WITH REAR TOW EYES
8. Raise the rear of the bus.
9. Install a jack stand under the stinger arm for
support and safety purposes and then lower
the stinger arm so it rests on the jack stand
(fig.63). The tow cans or blocks can be
removed from under the drive axle wheels.
FIG.63
