1. Keep the instrument dry.
2. Keep the instrument and battery out of reach of infants
and children.
3. When the symbol “ ” appears,the batteries are low
and should be replaced. Ensure that battery polarity
connections are correct when replacing batteries. If you are
not using the instrument for a long time, remove the battery.
Ensure that battery polarity connections are correct
when replacing batteries.
If you are not using the instrument for a long time, remove
the battery.
AC WIRE WARNING:
AC WIRE WARNING detection feature works
continuously in Stud scan, Deep scan, and metal scan
modes. When live AC voltage is detected, the AC
detection warning indicator icon will appear in the
display. Use extreme caution under these
circumstances or whenever live AC wiring is present.
• Using the product without instruction
• Using outside the stated limits
• Deactivation of safety systems and removal of explanatory
and hazard labels
• Opening of the equipment by using tools (screwdrivers,
etc.)
• Carrying out modification or conversion of the product
• Use of accessories from other manufacturers without
express approval
Never attempt to repair the product yourself. In case of
damage, contact a local dealer.
Refer to section "Technical data", the device is designed for
using in areas which is habitable for humans.
Do not use the product in explosion hazardous areas or in
aggressive environments.
• To understand the safety instructions on the product and
the instructions in the User Manual.
• To be familiar with local safety regulations relating to
accident prevention.
• Always prevent access to the product by unauthorized
personnel.
This instrument can be used to detect wood stud, metal and
live conductors. It will display signal bar on the center of the
LCD and make a beep sound out when the instrument is
near to the object, which ensures a high level of functional
reliability.
DO NOT ASSUME THESE ARE NO LIVE ELECTRICAL
WIRES IN THE WALL. DO NOT TAKE ACTIONS THAT
COULD BE DANGEROUS IF THE WALL CONTAINS A
LIVE ELECTRICAL WIRE. ALWAYS TURN OFF THE
ELECTRICAL POWER, GAS, AND WATER SUPPLIES
BEFORE PENETRATING A SURFACE. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN
ELECTRICAL SHOCK, FIRE, AND/OR SERIOUS INJURY
OR PROPERTY DAMAGE.
ALWAYS TURN OFF POWER WHEN WORKING NEAR
ELECTRICAL WIRES.
IMPORTANT:
Read before Using
EN
The safety instructions and the user manual
should be read through carefully before the
product is used for the first time.
SAFETY INSTRUCTION
PROHIBITED USE
LIMITS OF USE
FUNCTION
AREAS OF RESPONSIBILITY
RESPONSIBILITIES OF THE PERSON IN
CHARGE OF THE INSTRUMENT:
1
2
