Inspection and Adjustment
T.O.2
| 29
5.2 Circle Vial
Inspection and
Adjustment
5.3 Laser Plummet
Turning the laser
plummet on/off
With turned on instrument turn on the laser plummet by pushing the
button on the
keyboard. To turn off the laser plummet, press the
button again.
Inspection
1. Set the instument on the tripod (no adjustment is required).
2. Place the cross mark excactly under the instrument.
3. With turned on instrument turn on the laser plummet by pushing the
button.
4. Turn the instrument for 180°.
After making sure that the long water level is
correctly adjusted, check if there is any off-
center with the round water level. If there is
no off-center, no adjustment is required;
otherwise, adjust the three adjustment
screws with needle as shown to center the
bubble.
