40
MBOX EXTREME
®
MEDIA SERVER USER MANUAL
Each output section on the Dual I/O module has three toggle switches on the front panel. When active, the left-most
switch blacks out the stage outputs. When active, the middle switch causes the preview outputs to dim in parallel with
the stage outputs. The right-hand switch controls the EDID capture functions of the I/O module (refer to Connected
Display Devices and EDID below for more explanation).
The rear panel of the I/O Module provides DVI connectors for the signals from the computer. The rear panel also
includes two USB ports and two Ethernet ports. The USB allows for control of the unit from the computer and must
be connected for proper function. The Ethernet allows DMX/Art-Net control signals to pass from the Dual I/O module
to the computer. Finally there are two connectors for Genlock. Only one of these two connectors will be connected at
any time.
Figure 4-2: Mbox Extreme Dual I/O Module (Rear View)
USB 1
DVI IN 1
VIDEO SYNC 1
100 -240 VAC
1A MAX
50 / 60 Hz
AC IN
ETHERNET A
USB 2
DVI IN 2
VIDEO SYNC 2
ETHERNET B
Ethernet (Art-Net)
USB Ports
Video Sync
DVI Inputs
A/C Input Connector
Ports (A & B)
(1 & 2)
Ports (1 & 2)
(1 & 2)
Summary of Contents for MBOX EXTREME
