background image

22                                                                                        www.pridemobility.com                                                  Riser Recliner Series

RISER RECLINER SERIES

Your Pride Riser Recliner will require routine maintenance checks. You can perform some of

these checks, but others may require assistance from an authorised Pride Dealer. By following
the maintenance checks in this section as scheduled, you can help ensure your riser recliner
gives you years of trouble-free operation. If you have any questions regarding your riser
recliner’s care, contact your authorised Pride Dealer.

FABRIC CARE

Inspect the fabric on a regular basis for any pulls, tears or gaps.
Choose the right methods to clean your riser recliner. Before cleaning your riser recliner, consult your
authorised Pride Dealer for cleaning codes.
Your riser recliner fabric is made of 100% polyester and falls under cleaning code W. Frequent vacuuming
and light brushing to remove dust and grime is the recommended cleaning method for your riser recliner.
If spot cleaning is required, you should use the foam from water-based cleaning agents such as mild
detergent or non-solvent upholstery shampoo. Apply the foam with a soft brush in a circular motion and
vacuum when dry. Pretest a small area of the fabric with the cleaning agent before using this method. If
your riser recliner fabric is in an overall soiled condition, use a professional furniture cleaning service.

WARNING! Fabric should not be allowed to come in direct contact with any type of

heat source (e.g., a space heater or cigarette). Personal injury or fire damage may

occur.

WARNING! Pride strongly recommends that you do not smoke cigarettes while

seated in or using your riser recliner, although the riser recliner has passed the

necessary testing requirements for cigarette smoking. You must adhere to the

following safety guidelines if you decide to smoke cigarettes while seated in or

using your riser recliner.

Do not leave lit cigarettes unattended.

Keep ashtrays a safe distance from the riser recliner.

Always make sure cigarettes are completely extinguished before disposal.

NOTE: Do not use solvent-type cleaners to spot clean. Do not saturate the fabric. Prevent damage to
the fabric; do not expose the riser recliner to direct sunlight.

 

ELECTRONICS CARE

Inspect all wiring harnesses to make sure they are not damaged or frayed.
If damage is present, unplug the riser recliner and contact your authorised Pride Dealer for service.
Keep all electronics free from moisture and temperature extremes. 

Pride Riser Recliners are intended

for indoor use only!

WARNING! Even though the riser recliner has passed the necessary testing

requirements for ingress of liquids, you should keep electrical connections away

from sources of dampness, including direct exposure to water or bodily fluids and

incontinence. Check electrical components frequently for signs of corrosion and

replace as necessary.

DISPOSAL AND RECYCLING

Your riser recliner must be disposed of according to applicable local and national statutory regulations. Con-
tact your local waste disposal agency or authorised Pride Dealer for information on proper disposal of riser
recliner packaging, metal frame components, fabric, electronic components and batteries.

WARNING! Plastic bags are a suffocation hazard. Dispose of plastic bags properly

and do not allow children to play with them.

VII. CARE AND MAINTENANCE

Summary of Contents for 200KD





























Reviews: