25
V I I I . B A S I C T R O U B L E S H O O T I N G
What if all the systems on my scooter seem to be “dead?”
Make certain that the key is in the “on” position.
Check that the batteries are fully charged.
Push in the main circuit breaker reset button. See IV. “Your Scooter.”
Make certain that both battery harnesses and the front-to-rear harness are firmly connected. See
VIII. “Disassembly and Assembly.”
Be sure the power down timer feature hasn’t been activated. See VI. “Operation.”
What if my scooter does not move when I engage the throttle control lever?
When the manual freewheel lever is pushed forward, the brakes are disengaged and all power to the
motor/transaxle assembly is cut.
Push rearward on the manual freewheel lever, turn the scooter off and then turn the scooter on to
return to normal scooter operation.
What if the main circuit breaker repeatedly trips?
Charge the scooter’s batteries more frequently. See V. “Batteries and Charging.”
If the main circuit breaker trips repeatedly, contact your authorised Pride Provider for service.
See V. “Batteries and Charging” or III. “Specifications” for information about your scooter’s battery
type.
What if the battery condition meter dips way down and the motor surges or hesitates when I
engage the throttle control lever?
Fully charge your scooter’s batteries. See IV. “Batteries and Charging.”
If you experience any problems with your scooter that you are not able to solve, immediately contact
your authorised Pride Provider for information, maintenance, and service.
