33
Ultimate 3-4/Rev A/July03
V I I I . D I S A S S E M B LY A N D A S S E M B LY
Toggle Latch Release
1. Push in the toggle latch release button while pulling back the toggle latch. See figure 15.
2. Position the toggle latch buckle over the top of the toggle latch. See figure 16.
3. Lower the tiller to the scooter floorboard.
Figure 16. Toggle Latch (Unlatched)
TOGGLE
LATCH
TOGGLE
LATCH
RELEASE
BUTTON
Figure 15. Toggle Latch (Latched)
TOGGLE
LATCH
BUCKLE
Frame Separation
1. Push back on the seat post to pivot the scooters rear section rearwards until the rear section is standing
vertically on its rear bumper. See figure 17.
2. Lift the front section up until the lower pegs are no longer in the slots. See figure 18.
3. Carefully move the front section away from the rear section.
Figure 17. Frame Positioning
Figure 18. Separating The Frame Sections
