12
3
2
1
Assembly
1. Use the frame release lever to lift the front section as you align the frame hooks of the front section
with the lower frame tube of the rear section.
See fi gure 7.
2. Once the frame hooks are over the lower frame tube, lower the front section and pivot the rear section
simultaneously. This will engage the frame lock-up automatically.
See fi gure 7.
3. Reinstall the battery pack
4. Reinstall the seat and rotate it until it is secured into place.
5. Plug the controller into the power base.
6. Reinstall under-seat storage.
Identifi cation Key
1. Frame Release Lever
2. Frame Hooks
3. Lower Frame Tube
Figure 7. Go-Chair Assembly