14
Armrest Width Adjustment
You can change each armrest’s width independently
of the other.
NOTE: Changing the armrest width may increase
the overall width of your Go-Chair.
To change the armrest width:
1. Locate the two armrest knobs on each side of
the seat frame.
See fi gure 9.
2. Loosen the knobs and remove detent pin.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs and reinsert detent pin.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform.
See
fi gure 10.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the adjustment
screw.
2. Turn the adjustment screw to raise or lower the
front of the foot platform.
See fi gure 10.
Figure 9. Armrest Width Adjustment
Figure 10. Foot Platform Angle Adjustment
Identifi cation Key
1. Armrest Knob (Located On Seat Frame)
2. Detent Pin
1
2
