25
ES2
NYLON LOCK NUT REPLACEMENT
Any nylon insert lock nut removed during the periodic maintenance, assembly, or disassembly of the
Travel Scooter must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may
cause damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are
available at local hardware stores or through your authorized Provider.
STORING YOUR TRAVEL SCOOTER
If you plan on not using your Travel Scooter for an extended period of time, it is best to:
Fully charge its batteries prior to storage.
Remove the battery pack from the Travel Scooter.
Store your Travel Scooter in a warm, dry environment.
Avoid storing your Travel Scooter where it will be exposed to temperature extremes.
Recommended storage temperature: -104ºF/-75ºC to 158ºF/70ºC.
Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures,
or stored without a full charge may be permanently damaged, causing unreliable performance and limited
service life. It is recommended that you charge the Travel Scooter batteries periodically throughout
periods of prolonged storage to ensure proper performance.
WARNING! Always protect batteries from freezing temperatures and never charge a
frozen battery. Charging a frozen battery can result in damage to the battery.
For prolonged storage, you may wish to place several boards under the frame of your Travel Scooter to
raise it off of the ground. This takes the weight off the tires and reduces the possibility of flat spots
developing on the areas of the tires contacting the ground.
DISPOSAL OF YOUR TRAVEL SCOOTER
Your Travel Scooter must be disposed of according to applicable local and national statutory regulations.
Contact your local waste disposal agency or authorized Provider for information on proper disposal of
packaging, metal frame components, plastic components, electronics, batteries, neoprene, silicone, and
polyurethane materials.
V I I I . C A R E A N D M A I N T E N A N C E
