Jazzy 1100/RevJ/Feb03
www.pridemobility.com
25
V I . C O M F O R T A D J U S T M E N T S
Figure 24. Footrest Height
REMOVE THESE NUTS AND BOLTS
TO RAISE OR LOWER THE FOOTREST
Figure 25. Footrest Angle
TURN SETSCREW TO CHANGE FOOTREST ANGLE
SFR
RELEASE
LEVER
Figure 26. Swing-away Footrests
FOOTREST HEIGHT
The footrest height is easily adjusted to one of six dif-
ferent heights in 1-in. increments.
To raise or lower the footrest:
1. Remove the two 7/16-in. bolts and their nuts from
the footrest. See figure 24.
2. Raise or lower the footrest to the desired height.
3. Install the two 7/16-in. bolts and nuts into the foot-
rest and tighten.
FOOTREST ANGLE
You can adjust the angle of the footrest with a 3/16-in.
hex wrench. See figure 25.
To adjust the footrest angle:
1. Turn the setscrew clockwise to raise the front of
the footrest.
2. Turn the setscrew counterclockwise to lower the
front of the footrest.
SWING-AWAY FOOTRESTS OPTION
Swing-away footrests (SFRs) are an option. They en-
able you to swing the footrest to the side before trans-
ferring from your Jazzy.
To swing the footrests:
1. Push in the release lever. See figure 26.
2. Swing the footrest off to the side.
ELEVATING LEG RESTS OPTION
Elevating Leg Rests (ELRs) offer an infinite range of
adjustment between 0 and 70 degrees for the leg angle
and a footrest adjustment range of 15 20 in.
To adjust the ELR angle:
1. Press the release lever. See figure 27.
2. Move the leg rest to the desired angle.
