Jazzy 1115 Rev H/Feb03
www.pridemobility.com
27
V I I . D I S A S S E M B L Y
The Jazzy 1115 disassembles into eight easily transportable component assemblies with no tools required. See
figure 20.
WARNING! Even though no tools are required to disassemble or assemble the Jazzy 1115, you
should take care not to place your hands or fingers on the areas of the component assemblies
where they may be pinched, as the assemblies snap together or snap apart.
WARNING! Some power chair components are heavy. You may need assistance to life or carry
them. Please refer to IV. The Jazzy 1115 for specific component weights before you disassemble
the power chair.
LEFT
FRAME
ASSEMBLY
FOOTREST
SEAT
RIGHT
FRAME
ASSEMBLY
FRONT
BATTERY
BOX
REAR
BATTERY
BOX
BATTERY
WELL
FRAME
FRONT
FRAME
Figure 20. The Jazzy 1115 component assemblies
NOTE: During both the disassembly and the assembly of the Jazzy 1115, you may find it helpful to engage the
Jazzy drive motors so that it does not roll while you are disassembling or assembling it.
To disassemble the Jazzy 1115:
Position the Jazzy in a location where there is ample working room on all four sides of the Jazzy. We recommend
three or more feet of clearance on all sides. There are eight component assemblies in the chair. Some of them, such
as the seat and the side frame assemblies, take up a great deal of room when disassembled from the chair as a
whole. Also, make certain that the Jazzy is turned off.
To remove the footrest:
Remove the footrest by sliding the mounting bracket up the vertical bar of the front frame until the tabs
on the mounting bracket can be pulled forward through the matching slots in the front frame.
See figure 21.
