24
www.pridemobility.com
Quantum Jazzy 1650 Series
V . C O M F O R T A D J U S T M E N T S
Heavy Duty Drop-in Armrests
The heavy duty drop-in armrests are attached to the chair
with an armrest locking mechanism that is fastened to the
side rails of the seat. These armrests can be removed for
easy transfer onto and off of the power chair. Both the po-
sition and the overall height of the armrests can be adjusted.
To remove the armrest assembly:
1. Rotate the armrest lock lever rearward. See figure 10.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest lock. See
figure 10.
2. Rotate the armrest lock lever forward.
Armrest Position Adjustment
The position of the armrests along the side rails can be ad-
justed forward or rearward.
To adjust the armrest position:
1. Remove the armrest from the armrest lock.
2. Loosen the hardware that fasten the armrest lock to the
seat base side rail. See figure 11.
3. Slide the armrest lock forward or rearward along the
seat base side rail.
4. Tighten the armrest lock hardware.
5. Install the armrest in the armrest lock. See figure 11.
6. If necessary, repeat for the other armrest.
Armrest Height Adjustment
The height of the armrest can be adjusted by sliding the
armrest up or down the detent bar.
To adjust the armrest height:
1. Rotate the armrest lock lever rearward and remove the
armrest from the armrest lock. See figure 12.
2. Remove the hardware from the side of the armrest.
3. Slide the armrest up or down the detent bar to the de-
sired height.
4. Reinstall the hardware to the side of the armrest.
5. Install the armrest in the armrest lock and rotate the
lock lever forward.
6. If necessary, repeat for the other armrest.
Figure 11. Armrest Position Adjustment
ARMREST LOCK
SEAT BASE SIDE RAIL
Figure 10. Armrest Removal
UNLOCKED POSITION
LOCKED
POSITION
