30
www.pridemobility.com
Quantum Q6 Edge
V . C O M F O R T A D J U S T M E N T S
Positioning Belt
Your power chair may be equipped with a positioning
belt that can be adjusted for operator comfort.
See fig-
ure 21.
The positioning belt is designed to support the
operator so that he/she does not slide down or forward
in the seat. The positioning belt is not designed for use
as a restraining device.
To install the positioning belt:
1. Remove the rearmost screw that holds the seat
hinge to the seat base on both the left and right seat
hinges.
2. Insert the screw through the supplied washer,
through the positioning belt and into the seat base
for each side of the power chair seat.
3. Tighten both screws.
To adjust the positioning belt for operator comfort:
1. Once seated, insert the metal tab on one side of the
belt into the plastic housing on the opposite side
until you hear a click.
See figure 21.
2. Pull the excess strap attached to the metal tab until
it is secure, but not so tight as to cause discomfort.
Figure 21. Positioning Belt Adjustment
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning belt is properly secured to the power chair and is
adjusted for operator comfort before each use.
MANDATORY! Inspect the positioning belt for loose or damaged parts before each use of the
power chair. If you discover a problem, contact your Quantum Rehab Provider for maintenance
and repair.
Summary of Contents for Quantum Q6 Edge HD
Page 1: ...QUANTUM Q6 Edge...
Page 42: ...42 www pridemobility com Quantum Q6 Edge N O T E S...
Page 43: ......
