User Manual (Page 26 of 30)
7. TROUBLESHOOTING AND SPECIFICATION
■
TROUBLE SHOOTING
You can inspect the following before taking you scooter to the dealer.
Symptom
Remedy
The scooter will not switch on
Try recharging the battery
Check the fuse and circuit breaker in the scooter
The scooter switches on, but the
scooter will not move.
Ensure there is enough power in the batteries. If not, recharge
the batteries.
Ensure the freewheel lever is engaged in the ‘DRIVE’
position.
The scooter appears slow
Check the battery power level and recharge
Check the speed dial is not set to slow.
The seat turns when in operation
Slowly rotate the seat until it drops in to place and is secure
The handlebar appears loose
Tighten the height adjustment handle to secure the handlebar
Involuntarily horn sounds
Ensure that the wigwag paddle is released.
Switch the scooter off and on.
Recharge the batteries.
If problem persists contact your Pride dealer.
If you cannot solve the problem by yourself, contact your dealer for help.