Travel Mate
www.pridemobility.com
25
I V . B A T T E R I E S A N D C H A R G I N G
BATTERY COMPARTMENT
COVER
Figure 13. Battery Pack Removal
Figure 14. Battery Harnesses and Battery Cables
Battery Pack Removal
1. Remove key from key switch.
2. Remove the seat by pulling it straight up and off of
the Travel Scooter.
3. Remove the battery compartment cover. See
figure 13.
4. Lift the battery pack up and out of the battery com-
partment until the battery harnesses are exposed.
5. Disconnect the battery harnesses leading from the
battery pack from their matting plugs on the Travel
Scooter.
Battery Replacement
1. Unzip the battery pack and carefully slide the
batteries out.
2. Disconnect the battery cables from the battery
terminals of both batteries.
3. Reconnect the battery cables to the battery termi-
nals of each new battery. See figures 14 and 15.
!
Red and white cables to (+) positive terminals.
!
Black and green cables to (-) negative terminals.
4. Insert the batteries into the battery pack, making
sure the battery harnesses extend through the open-
ing in the battery pack. See figure 13.
5. Connect the battery harnesses extending from the
battery pack to their color-coded mating harnesses
extending from the Travel Scooter.
6. Reinstall the battery pack and the battery com-
partment cover.
7. Reinstall the seat.
NOTE: If you encounter a damaged or cracked
battery, immediately enclose it in a plastic bag
and call your authorised Pride Provider for in-
structions on disposal. Your authorised Pride
Provider will also have the necessary informa-
tion on battery recycling, which is our recom-
mended course of action.
BATTERY PACK
Figure 15. Battery Cable Orientation
BATTERY HARNESSES
WHITE (+)
GREEN (-)
RED (+)
BLACK (-)
Summary of Contents for TRAVEL MATE
Page 1: ...TRAVEL MATE...
Page 39: ...Mobility Products Australia Pty Ltd INFMANU3673...
