11
Victory
CONTROL CONSOLE ASSEMBLY
The control console assembly houses all the controls you need to drive your Victory, including the key switch, the
speed adjustment dial, the throttle control lever, the battery condition meter, the horn button, and the light switch.
See figure 7.
Do not expose the control console assembly to moisture. In the event that the console does become exposed to
moisture, do not attempt to operate your Victory until the control console assembly has thoroughly dried.
Key Switch
n
Fully insert the key into the key switch to power up (turn on) your Victory.
n
Pull the key out to power down (turn off) your Victory.
Speed Adjustment Dial
This adjustment dial allows you to preselect and limit your Victory’s top speed.
n
The image of the tortoise represents the slowest speed setting.
n
The image of the hare represents the fastest speed setting.
I V . Y O U R V I C T O R Y
Your Victory is a motorized electric Scooter designed to enhance your personal mobility. Your Victory is an indoor/
outdoor Scooter designed to travel primarily on smooth surfaces such as sidewalks, roads, parking lots, floors,
and driveways. For easy transportation or storage, you can disassemble your Victory into seven components. See
figure 6.
FIGURE 6. SEVEN VICTORY COMPONENTS
FRONT SECTION
REAR SECTION
SEAT
BASKET
BATTERIES
REAR SHROUD
WARNING! If the key is removed from the key switch while your Victory is in motion, the
electronic brakes will engage and your Victory will come to an abrupt stop!
