17
Victory XL-3
I V . Y O U R V I C T O R Y X L - 3
Your Victory XL-3 is an indoor/outdoor, motorised electric scooter designed to enhance your personal
mobility. For easy transportation or storage, you can disassemble your Victory XL-3 into six components.
See figure 5.
FIGURE 5. VICTORY XL-3 COMPONENTS
CONTROL CONSOLE ASSEMBLY
The control console assembly located on the front section houses all of the controls you need to operate
your scooter. See figure 6.
MAIN FRAME
REAR SHROUD
FRONT BASKET
BATTERIES
SEAT
CAUTION! Do not expose the control console assembly to moisture. In the event it does become
exposed to moisture, do not attempt to operate your Victory XL-3 until it has dried thoroughly.
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate
battery voltage strength. For further information on battery charging, see V. Batteries and Charging.
FIGURE 6. CONTROL CONSOLE ASSEMBLY
BATTERY CONDITION METER
THROTTLE
CONTROL LEVER (REVERSE)
THROTTLE CONTROL LEVER
(FORWARD)
LIGHT SWITCH
HAZARD LIGHT SWITCH
SPEED ADJUSTMENT DIAL
KEY SWITCH
HORN BUTTON
HORN BUTTON